7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLE & FIT THE DRAWER
1. Assemble the side panels
(P), rear panel (O) and
front panel (M) of the
drawer using bolts, washers
and nuts as shown.
2. Rest the drawer bottom (Q)
into the drawer frame.
3. Attach the handles (7) to
the sliding drawer using four
bolts (4) and nuts (8).
4. Add the draw runners (W)
to the inside faces of the
drawer mounting bars using
bolts (4) and nuts (8) as
follows.
•
The runners are in three
parts. The wider part fits to
the frame and the narrow
part to the side of the
drawer.
5. Separate the narrow part
from the middle part by
means of the spring catch
(just visible where the two
parts meet).
6. Screw the wide parts to the
frame and the narrow parts
to the drawer sides.
7. Slide the drawer into
position by Iining up the
parts of the runners on the
frame with those on the
drawer and sliding the
draw into position.
•
The catches will make a
slight click as they lock the
runner parts together.