background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE workbench.

Before attempting to use this product, please read and follow the instructions 
carefully. In doing so you will ensure the safety of yourself and that of others 
around you, and you can look forward to your purchase giving you long and 
satisfactory service.

Please keep these instructions in a safe place for future reference.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL PROTECTION

Do not dispose of old products or damaged parts with general 
household waste. All tools, accessories and packaging no longer 
required should be sorted, taken to a recycling centre and 
disposed of appropriately.

UNPACKING

Open the carton and lay out the components carefully, identifying them 
according to the component parts list.

All components have identifying stickers that correspond with the component 
parts list.

Should any part be damaged or missing, please contact your Clarke dealer 
immediately for replacement.

Содержание CWBR1B









Отзывы: