7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
12. Connect the hydraulic hose to the
ram cylinder, sealing the joint with
PTFE tape and tighten using two
open ended spanners.
13. The pressure gauge is sealed for
transit and it will be necessary to
make a small hole in the pressure
gauge safety bung with a short
pin or nail before use.
•
Do not use a long nail as you
may damage the internal
components of the gauge.
14. Bolt the pressure gauge into
position on the hydraulic ram.
•
We recommend sealing the
thread with PTFE tape. Take
care not to let any oil escape
while connecting the hose.
15. Top up the hydraulic oil to the
lower level of the filler plug.
Содержание CSA20FBT
Страница 20: ......
