5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
IMPORTANT: Due to the weight of the press components, we recommend
that you get assistance during assembly.
IMPORTANT: The press should be firmly secured to a firm and level floor
using expansion bolts (not supplied). Holes are provided in the base
supports for this purpose.
IMPORTANT: Do not locate your press where it will be open to the elements,
as harsh weather conditions will damage the hydraulic parts.
1. With the help of an assistant,
attach the base supports to the
side posts using the nuts, bolts and
washers.
2. Add the stay bars to each side
and bolt into place.
3. Bolt one of the upper cross
members into place to connect
the side posts together.
4. Take the second upper cross
member and the ram carrier and
tie the two cross members
together using the ram carrier.
Then bolt the second cross
member to the side posts as
shown.
•
The ram carrier can slide along the cross members.
5. Fit and tighten the locking bolts
loosely to stop the ram carrier
from sliding to and fro.
6. Lift the complete press assembly
upright and manoeuvre it to its
intended location in the
workshop.
Содержание CSA20FBT
Страница 20: ......
