6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7. Bolt the pump assembly to one of
the side posts. Thread the fixing
bolts though the side post from
the inside as shown.
•
This will become the right hand
side of the press.
8. Lower the ram through the hole in
the moving ram carrier and
secure in position using the
locking collar.
9. Assemble the pressing bed using
the four spacers and the 140mm
bolts with nuts and washers.
10. Insert the bed support pins into
the holes in the frame side
supports at a height of your
choosing.
11. Lift the pressing bed into position
on the pins.
•
Due to the weight of the bed,
we recommend that you get
assistance from another
person.
Содержание CSA20FBT
Страница 20: ......
