3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
•
Due to the weight of the press, the help of an assistant will be beneficial
during assembly and installation.
•
Always operate the press with adequate light.
•
Before starting work, check for signs of cracked welds, loose or missing
bolts, or any other structural damage. Do not operate if any of these
conditions exist. Have repairs made only by authorised service centre.
•
Before work, always ensure that hydraulic hoses and couplings are
completely sound.
•
Never tamper with the press components. The safety valve is calibrated
and sealed at the factory; do not attempt to change the setting.
•
Use only the recommended hydraulic oil.
•
The components of this press are designed to withstand the rated
capacity. Do not substitute any other components or exceed the rated
capacity of the press.
•
Before applying pressure, always ensure the workpiece is firmly secure
and stable.
•
Always clean up spills of hydraulic oil immediately as this can be
dangerous in a workshop environment.
•
Do not allow any person who is unfamiliar with hydraulic presses to use
the press unless they are under direct supervision.
•
Do not stand directly in front of the press when it is in use.
•
Always apply the load under the centre of the ram. Offset loads can
damage the ram and may cause the work piece to be ejected.
•
Always ensure the work piece is properly supported by the press bed.
•
When using accessories such as pressing plates, be certain they are
centered below the ram and are in full contact with the bed.
•
Parts being pressed may shatter or be ejected from the press. In the
case of varied applications, it is your responsibility to always use
adequate guards, and wear eye protection and protective clothing
when using this press.
•
Keep hands and fingers away from parts that may pinch or shift.
•
Never use extension tubes to increase the length of the pump handle.
Excessive effort can cause damage and/or accidents.
•
Failure to heed these warnings may result in damage to the equipment,
or serious personal injury.
Содержание CSA20FBT
Страница 20: ......
