19
ADJUSTING THE RIP FENCE
1.
Lift the fence handle up.
2.
Slide the rip fence to the position you
require.
3.
Push the fence handle down to lock the Rip
Fence into place.
ADJUSTING THE LASER GUIDE
To align the laser guide proceed as follows.
1.
Set the blade angle to 0
o
.
2.
Remove the blade guard. From this point on,
take great care not to damage your hands
on the saw blade teeth.
3.
Switch the laser guide on.
4.
Carefully grip the end bezel on the laser guide
and turn it until the beam is parallel with the
blade.
5.
Loosen the two adjustment screws in the
mounting bracket on the front of the laser
holder (Fig.21).
6.
Move the front of the laser holder until the
beam is running along the edge of the
blade.
7.
Retighten the two adjustment screws.
8.
Replace Blade Guard.
Fig.19
Fig.20
Fig.21
