12
Fig.2
IMPORTANT:
Take great care to avoid contact with the saw teeth which are extremely sharp
when performing the following operations.
ASSEMBLY
A. TABLE EXTENSION
1.
Loosen the extension table clamps.
2.
Slide the extension table into the two holes on the side of the table saw.
3.
Secure each extension table by tightening up the extension table clamps.
B.
PUSH STICK STORAGE
1.
Store the Push Stick in the holder provided.
C. RIVING KNIFE
1.
Remove the table insert (1 countersunk
screw).
2.
Raise the blade as far as possible and adjust
the blade angle, so that the blade lays at a
45o angle.
Fig. 3
Fig.4
