15
MOUNTING THE SAW ON TO THE STAND
Fig.10
Fig.11
Fig.12
STAND SETUP
The Stand is supplied flat.
1.
Stand the assembly on its two wheels.
2.
Pull the front pair of legs down and out as shown
until they click into place.
3.
Repeat the process with the second pair of legs.
4.
The stand should appear as shown in Fig.12.
5.
Place table saw on the stand aligning the holes in
the base with the holes drilled in the table.
6.
Use the nuts, bolts and washers supplied to secure
the table saw to the stand.
