background image

    

  

ELECTRICAL CONNECTIONS

This product is provided with a 13 amp, 230 volt (50Hz), BS 1363 plug, for connection
to a standard, domestic electrical supply. Should the plug need changing at any
time, ensure that a plug of identical specification is used.

WARNING!

This appliance is of Double Insulation construction

No earth conductor is provided. The two wires in the mains lead should be wired
up in accordance with the following colour code:

Blue

Neutral

Brown

Live

Connect the BROWN coloured cord to the plug terminal marked a letter “L”
Connect the BLUE coloured cord to the plug terminal marked a letter “N”

If this appliance is fitted with a plug which is moulded on to the electric cable (i.e.
non-rewireable) please note:

1.

The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket outlet.

2.

Never use the plug without the fuse cover fitted.

3.

Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).

4.

Replacement fuse covers can be obtained from your local dealer or most
electrical stockists.

Fuse Rating

The fuse in the plug must be replaced with one of the same rating (

13 amps

) and

this replacement must be approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

Cable Extension

Do not use an extension longer than 10 metres and one where the conductors, are
less than 1.5mm

2

.

If used outdoors, ensure the extension cable is designed for outdoor use.

6

24. NEVER use a cutting-off wheel for side grinding.

25. ALWAYS ensure the work is properly secured or supported.

26. Do not allow flying sparks to fall on sensitive areas. Be aware of fire risks.

27. When not in use always store in a dry clean environment and out of reach of

children.

Additionally, ALWAYS keep these instructions in a safe place for future reference.

Содержание CON115












Отзывы: