4
2.
ALWAYS ensure that ADEQUATE LIGHTING is available. A minimum intensity of
300 lux should be provided. Ensure that lighting is placed so that you will not
be working in your own shadow.
3.
CHECK FOR DAMAGE. Before using the tool, any damaged part should be
checked to ensure that it will operate properly and perform its intended
function. Check for alignment of moving parts, breakage of parts, mountings
and any other condition that may affect the tools’ operation. Any damage
should be properly repaired or the part replaced. If in doubt, DO NOT USE the
tool. Consult your local dealer.
4.
DISCONNECT THE TOOL from the power supply before servicing and when
changing accessories.
5.
ALWAYS WEAR SAFETY GOGGLES manufactured to the latest European Safety
Standards. Everyday eyeglasses do not have impact resistant lenses, and are
NOT safety glasses.
6.
KEEP WORK AREA CLEAN. Cluttered work areas and benches invite accidents.
7.
DON’T FORCE the tool. It will do a better and safer job at the rate for which it
was designed.
8.
ALWAYS use a face or dust mask if operation is particularly dusty.
9.
DRUGS, ALCOHOL & MEDICATION. Do not operate tool while under the
influence of drugs, alcohol or any medication.
10. USE RECOMMENDED ACCESSORIES. The use of improper accessories could
be hazardous.
11. NEVER LEAVE THE TOOL RUNNING UNATTENDED. Turn power OFF. Do not leave
the tool until it comes to a complete stop.
12. AVOID DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet
locations or expose them to rain. Keep your work area well illuminated.
DO NOT USE in an explosive atmosphere (near paint, flammable liquids etc).
13. KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work
area, especially whilst operating the tool.
14. MAINTAIN TOOL IN TOP CONDITION. Keep tools clean for the best and safest
performance. Follow maintenance instructions.
15. DON’T OVERREACH. Keep your proper footing/balance at all times. For best
footing wear rubber soled footwear. Keep floor clear of oil, scrap wood, etc.
16. WEAR PROPER APPAREL. Loose clothing or jewellery may get caught in moving
parts. Wear protective hair covering to contain long hair.
17. HANDLE WITH EXTREME CARE Do Not carry the tool by its electric cable, or
yank the cable to disconnect it from the power supply.
18. AVOID ACCIDENTAL STARTING. Ensure the switch is OFF before plugging into mains.
19. BE AWARE that accidents are caused by carelessness due to familiarity.
ALWAYS concentrate on the job in hand, no matter how trivial it may seem.
20 Guard against electric shock. Avoid body contact with earthed or grounded
surfaces (e.g. Pipes, Radiators, Ranges, Refrigerators).
