Clarke CIS100, Инструкция по эксплуатации и обслуживанию

Страница: 4 / 16

4
SAFETY PRECAUTIONS
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - do not let children handle the
screwdriver.
4. DO NOT use in damp or wet conditions. Keep the work area well lit. Do not
use where a risk of fire or explosion is present.
5. Although the impact screwdriver may be used outdoors, DO NOT leave it
exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture
etc.
6. Always keep body and clothing dry. Never work in damp area without
adequate insulation against electric shock.
7. Do not fit the screwdriver to any stand or clamping device that may
damage it.
GENERAL USE
1. This product vibrates during use. Vibration may be harmful to your hands
or arms. Stop using the machine if discomfort, a tingling feeling or pain
occurs and seek medical advice before resuming use.
2. ALWAYS use ear defenders.
3. ALWAYS stay alert and use common sense - do not use this product when
you are tired or under the influence of alcohol or medication.
4. ALWAYS ensure the workpiece is firmly secured leaving both hands free to
control the impact screwdriver.
5. ALWAYS wear eye protection when using this product - eye protection
must provide protection from the front and the side.
6. ALWAYS ensure the machine has stopped before putting it down after use.
7. ALWAYS set the forward/reverse switch-bar to neutral when changing bits
or when the machine is not required for immediate use.
8. ALWAYS ensure that any bits are correctly installed before switching on.
9. ALWAYS store this product in a dry, secure place out of reach of children.
10. ALWAYS keep all equipment dry especially the battery & battery charger.
11. ALWAYS check for any damage or any condition that could affect its
operation. Any damaged part should be properly repaired.
12. NEVER carry out any alterations or modifications to this product.