Clarke CIS100, Инструкция по эксплуатации и обслуживанию

Страница: 10 / 16

10
7. Before starting work, always perform a test operation to determine the
appropriate tightening effort for the screw in whatever material is being
used.
8. Turn off the machine as soon as the impact sound is heard, taking care
not to damage the screw. Extra care is needed with small screws.
Note: As the battery becomes discharged, the power available will drop.
Operating the machine at low speed will cause a reduction in torque.
9. After use, recharge the battery cartridge as shown on pages 7-8. Avoid
leaving your batteries in a discharged state.
MAINTENANCE
Keep the unit clean by wiping with a dry cloth. DO NOT use solvents as a
cleaning agent.
Keep the battery pack well charged at all times.
Check the battery charger power cable to ensure it is sound & free from
cracks etc.
All bearings in this tool are lubricated with sufficient amount of high quality
lubricant for the tool’s lifetime under normal operating conditions, therefore
no further lubrication is required.
Refer to your Clarke dealer if internal maintenance is required.
Your Clarke Impact Screwdriver has been designed to give long and trouble
free service. If, however, having followed the instructions in this booklet
carefully, you encounter problems, take the unit to your local Clarke dealer.
SPARE PARTS & SERVICE CONTACTS
For parts & servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com