7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools. If in doubt,
DO NOT
use the machine. Consult your local CLARKE dealer.
6. Machine cleanliness.
DO NOT
allow the ventilation slots in the machine/
motor to become blocked with dust.
7. Regularly clean the power tool’s air vents. The motor fan will draw dust
inside the housing and accumulation of material could cause electrical or
fire hazards.
8. Maintain your tools. Keep all handles and grips dry and clean.
SERVICING
1. When necessary, have your power tools serviced or repaired by a qualified
person using identical replacement parts (see pages 36-41). This will ensure
that the safety of the power tool is maintained.
ADDITIONAL PRECAUTIONS FOR BANDSAWS
1.
ALWAYS
check safety guards are in place and functioning correctly before
switching the machine on.
2.
ALWAYS
use the appropriate saw blade for the material being cut.
3.
NEVER
use the machine if the electric cable, plug or motor is in poor
condition.
4.
NEVER
touch the blade immediately after use, when changing the blade
always allow time for it to cool.
5.
NEVER
use bent or cracked blades. (Replacement blades are available
from your CLARKE dealer, see page 32).
6. When cutting round stock, use a suitable jig or fixture to keep the work from
turning.
7.
ALWAYS
ensure the blade is fully tightened and correctly adjusted before
use.
8.
ALWAYS
switch the machine off immediately the task is completed.
Содержание 6460123
Страница 44: ......
