34
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Machine stalls or
is underpowered
1. Wrong Blade for workpiece
material.
2. Wrong workpiece material.
3. Feed rate/cutting speed
too fast for task.
4. Blade is slipping on wheels.
5. Low power supply voltage.
6. Motor bearings are at fault.
7. Plug is at fault.
8. Motor connection is wired
incorrectly.
9. Motor has overheated.
10. Motor is at fault.
1. Use blade with correct
properties for your type of
cutting.
2. Use metal with correct
properties for your type of
cutting.
3. Decrease feed rate/
cutting speed.
4. Adjust blade tracking
and tension.
5.Make sure the power
source is set for correct
voltage.
6. Test by rotating shaft.
Rotational grinding/loose
shaft requires bearing
replacement.
7. Test for good contacts,
correct the wiring.
8. Correct motor wiring
connections.
9. Clean off motor, let cool
and reduce workload.
10. Test/Repair/Replace.
Machine has
vibration or noisy
operation
1. Motor fan is rubbing on fan
cover.
2. Blade is at fault.
3. Gearbox is at fault.
4. Wrong blade and/or speed
too slow.
1. Replace dented fan
cover; replace loose/
damaged fan.
2. Replace/resharpen
blade.
3.Rebuild gearbox and
replace bad gear(s)/
bearing(s).
4. Change blade and/or
speed.
Содержание 6460123
Страница 44: ......
