19
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
STARTING & STOPPING
The bandsaw has two start/stop
buttons. One for the saw motor
and one for the lubricant pump.
They both have a spring loaded
emergency stop cover, which
should always be in the down
position when the bandsaw is in
operation.
OPERATING TIPS
The following tips will help you safely and effectively operate your bandsaw
and help you get the maximum life out of your saw.
Tips for horizontal cutting:
•
Use work stop to quickly and accurately cut multiple pieces of stock to the
same length.
•
Clamp material firmly in the vice jaws to ensure a straight cut through the
material.
•
Let the blade reach full speed before engaging with the workpiece. Never
start a cut with the blade in contact with the workpiece.
•
Wait until the blade has completely stopped before removing workpiece
from the vice, and avoid touching the cut end as it could be very hot.
•
Support long workpieces so they won't fall when cut and flag ends of
workpieces to alert passers-by of potential danger.
•
Use coolant when possible to increase blade life.
•
Loosen blade tension at the end of each day to prolong blade life.
WORK VICE
The vice can cut angles from 0
o
- 45
o
and hold material up to 10.5” wide at 0
o
to 5” wide at 45
o
.
Содержание 6460123
Страница 44: ......
