20
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
TO SQUARE VICE TO BLADE
1. Loosen the locking bolt, as shown.
2. Use the scale as a guide to set
your angle, or a machinists square
to square the blade to the vice.
3. Tighten the lock bolt.
TO ADJUST VICE ANGLE
1. Loosen the lock bolt on the rear jaw,
as shown, with a wrench.
2. Use the scale to set your angle.
3. Tighten the lock bolt.
4. Loosen the lock bolt on the opposite
jaw, as shown, so the jaw can float,
and match the angle of the
workpiece.
5. Tighten vice against the workpiece.
6. Tighten the lock bolt.
Содержание 6460123
Страница 44: ......
