Clarke 6012200, Инструкция по эксплуатации и обслуживанию

Страница: 16 / 28

FEATURES
Your CLARKE Arc/TIG welder has been specially designed to provide high welding
current stability despite the possibility of unstable input voltages.
All models are controlled in a similar manner, although front panel components
are located differently, as shown in the illustration below.
Item 1 - The ON/OFF switch, located at the rear of the welder.
Item 2 - Welding Current Adjuster.
Item 3 - GREEN LED - will illuminate when the power is switched ON.
Item 4 - AMBER LED - will illuminate when the thermal overload has cut in.
Item 5 - +ve/positive lead socket.
Item 6 - -ve/negative leads socket.
Arc/TIG 85 & 110
a. GREEN LED
ON - Power ON
OFF - Power OFF. Also indicates that overvoltage or
undervoltage has occurred. Reset by switching OFF,
waiting 20 seconds, then switching back ON.
NOTE: that if the set current is too low for the electrode in use, the LED could
extinguish. For correct welding currents for a particular electrode size, see
the chart on page 18.
b. AMBER LED
ON - Thermal overload has intervened, switching OFF
the machine. Allow to cool down. The LED will
extinguish once the unit has cooled sufficiently to
continue.
16