Clarke 6012200, Инструкция по эксплуатации и обслуживанию

Страница: 12 / 28

✗
NEVER use or store in a wet/damp environment. DO NOT EXPOSE TO RAIN.
✗
The TIG welding process uses an INERT gas to protect the weld pool. It is
important to ensure the appropriate gas is being used.
NEVER use gas from
a cylinder, the content of which is unknown.
✗
NEVER a. Use a damaged cylinder.
b. Lift the cylinder by the valve.
c. Expose the cylinder to a heat source or sparks.
✗
NEVER continue to weld, if, at any time , you feel even the smallest electric shock.
Stop welding IMMEDIATELY, and DO NOT attempt to use the machine until the fault
is diagnosed and corrected.
✗
NEVER use the Welder with input connections greater than 10M in length.
✗
NEVER point the TIG torch at any person or animal.
✗
NEVER touch the TIG torch nozzle until the welder is switched OFF and the
nozzle has been allowed to cool off.
✗
NEVER connect, disconnect, or attempt to service the TIG torch, until the
machine is switched OFF and disconnected from the mains supply.
✗
NEVER allow the cables to become wrapped around the operator or any
person in the vicinity.
ADDITIONAL PRECAUTIONARY MEASURES
IMPORTANT:
The TIG machine generates both airborne and line interference due to the high
frequencies involved. It is important not to locate electronic or electrically sensitive
equipment in the vicinity of the welder or alternatively, do not locate the welder
in vicinity of electronic or electrically sensitive equipment.
12