6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
13. ALWAYS avoid damaging the tools by applying excessive force.
14. ALWAYS maintain the tools. Keep them clean for the safest performance.
15. Quick change couplings should not be located at the tool. They add
weight and could fail due to vibration.
16. DO NOT force or misuse the tools which will do a better and safer job at the
rate for which they are designed.
17. These tools vibrates with use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs.
Seek medical advice before resuming use.
IMPACT WRENCH SPECIFIC HAZARDS
1. ALWAYS
use the impact wrench as described in these instructions.
2. ALWAYS
ensure the wrench is not moving and disconnected from the air
supply when changing sockets etc. Use only impact wrench sockets....DO
NOT use standard sockets.
3. ALWAYS
finish tightening nuts with a torque wrench or suitable spanner to
the correct torque as recommended by the vehicle manufacturer.
4. ALWAYS
avoid excessive use of the impact wrench. When tightening a nut
or bolt, only allow the wrench to impact briefly to avoid overtightening.
5. ALWAYS
ensure that the socket is correctly installed before switching on.
6. ALWAYS wear suitable respiratory protection due to the possible presence
of asbestos dust from vehicle brake linings.
7. ALWAYS
disconnect from the air supply when changing sockets or when
the wrench is not required for immediate use to avoid accidental starting
8. DO NOT carry the wrench by the air supply hose.
9. ALWAYS
use both hands to control the wrench.
10. ALWAYS ensure the wrench has stopped before putting it down.
AIR HAMMER SPECIFIC HAZARDS
1. Only use accessories designed for use with this tool.
2. DO NOT use any of the chisels supplied as a hand struck tool.
3. DO NOT use blunt chisels which require excessive pressure and can break
from fatigue. Always use sharp tools.
4. DO NOT mis-use the tool by prising which can result in a broken chisel.
5. ALWAYS ensure there are no hidden electrical cables, gas pipes etc, which
could cause a hazard if damaged by action of the chisels.
Содержание 3110876
Страница 32: ......
