Clarion VZ509, Руководство пользователя

Страница: 51 / 67

50
VZ509A
English
Owner
’s ma
nua
l
When the ENTER PERSONAL CODE
screen appears
The Personal Code screen will be displayed
when turning the ACC power on after performing
the following operations:
• The car battery was replaced.
• The backup power was cut off.
• The Reset button was pressed.
Note:
• If you forgot your Personal Code, please consult
your dealer or an authorized Clarion service
center.
1. Enter your Personal Code currently set.
2. When the correct Personal Code is entered,
the unit will restart from the initial startup
screen.
Note:
• When you enter a wrong Personal Code, the
message “Code Incorrect” is displayed and the
Personal Code entry is prohibited for a while. This
prohibited time is changed according to the
number of times of wrong code entry as follows:
• 1 to 6 times: 15 seconds
• 7 times or more: 15 minutes
❏
Setting the Auto Antenna
When an auto antenna which is extended
automatically is used, you can set so that it is
automatically extended/collapsed according to
the power setting of this unit.
1. Touch the [
SET ] key to display the Settings
screen.
2. Touch and hold the [ Auto ] or [ Down ] key of
the Antenna item for more than 1 second to
set this function.
Auto:
The auto antenna function is turned on.
Down:
The antenna is collapsed.
❏
Adjusting the Clock
• The time is displayed in 12-hour format.
Note:
• This setting is disabled when the Navigation
system is connected. The clock is automatically
adjusted using the CT (clock time) data in the GPS
data.
Adjusting the Monitor
You can customize the various monitor settings
by the following operations.
❏
Setting the Screen mode
The system has two screen modes: the Day
mode and Night mode. Each mode has the own
dimmer setting. You can select these modes
temporarily by performing the following
operation.
• The factory default setting is “
Auto ”.
1. Press the [ SRC ] button to display the Source
screen.
2. Touch the [ Day ], [ Night ], or [ Auto ] key to set
the Screen mode.
[Day]:
Set the dimmer level temporarily to the Day
mode (brighter).
[Night]:
Set the dimmer level temporarily to the Night
mode (dimmer).
[Auto]:
The dimmer level is changed according to the
status of the car light:
When the car light is off: Day mode
When the car light is on: Night mode
Note:
• When the navigation system (NP509A) is
connected and its Night Mode setting is set to
“
Automatic ”, this setting also works upon the
Color mode of the navigation system.
3-1. Touch the [ Clock ] key to display the Clock
tab screen.
3-2. Touch the [ + ], [ – ], [ am ], and [ pm ] keys under
the Hour, Minute, and am/pm items to adjust
the time, then touch the [
SET CLOCK ] key
(The factory default setting is “ 1:00 am ”).