Clarion VZ509, Руководство пользователя

Страница: 46 / 67

45
VZ509A
English
Owner
’s ma
nua
l
❏
Setting the Beat EQ
This system provides 4 types of sound tone
adjustment functions. You can select desired
function and adjust the effect level.
• The factory default setting is “
Off ”.
Notes:
• The volume will change each time the Beat EQ
function is switched.
• Sufficient effects may not be obtained with some
speaker systems. In such cases, adjust the
volume.
Adjusting the custom tone
●
Adjusting the Bass
●
Adjusting the Mid
●
Adjusting the Treble
❏
Adjusting the Balance/Fader
3-1. Touch the [ Beat EQ ] key to display the Beat
EQ tab screen.
3-2. Touch the [ BEQ1 ], [ BEQ2 ], [ BEQ3 ],
[ Custom ], or [ Off ] key to select the function
you wish to apply.
[BEQ1]:
The bass sound area is emphasized.
[BEQ2]:
The mid sound area is reduced, and the
bass and treble sound area are
emphasized.
[BEQ3]:
The mid sound area is lowered, and the
bass and treble sound area are extremely
emphasized.
[Custom]:
You can adjust the sound tone of bass, mid,
and treble areas individually. For details,
see the following section.
[Off]:
No sound effect is applied.
3-3. When you select an item other than
“ Custom ” and “ Off ” in step 3-2, adjust the
effect level by touching the [ – ] or [ + ] key.
Setting range: –3 to +3
• The factory default setting is “
0 ”.
3-1. Touch the [ Beat EQ ] key to display the Beat
EQ tab screen.
3-2. Touch the [ Custom ] key.
3-3. Perform the following settings to adjust the
sound tone.
3-4. Touch the [ Bass ] key.
3-5. Touch the [ – ] or [ + ] key of the desired item
to adjust the effect level.
Gain: –7 to +7
• The factory default setting is “ 0 ”.
Frequency: 50Hz, 100Hz, 200Hz
• The factory default setting is “ 100Hz ”.
Q: 0.7, 1, 1.4, 2
• The factory default setting is “ 1 ”.
3-4. Touch the [ Mid ] key.
3-5. Touch the [ – ] or [ + ] key of the desired item
to adjust the effect level.
Gain: –7 to +7
• The factory default setting is “ 0 ”.
Frequency: 500Hz, 1kHz, 2kHz
• The factory default setting is “ 1kHz ”.
Q: 0.7, 1, 1.4, 2
• The factory default setting is “ 1 ”.
3-4. Touch the [ Treble ] key.
3-5. Touch the [ – ] or [ + ] key of the desired item
to adjust the effect level.
Gain: –7 to +7
• The factory default setting is “ 0 ”.
Frequency: 5kHz, 10kHz, 15kHz
• The factory default setting is “ 10kHz ”.
Q: 0.7, 1, 1.4, 2
• The factory default setting is “ 1 ”.
3-1. Touch the [ BAL/FAD ] key to display the
BAL/FAD tab screen.
3-2. Touch the [
[
] or [
]
] key of the Balance item
to adjust the balance level.
[
[
]:
Emphasizes the sound from the left
speakers.
[
]
]:
Emphasizes the sound from the right
speakers.
Adjustment range: left 12 to right 12
• The factory default setting is “
0 ”.