15
VZ509A
English
Owner
’s ma
nua
l
Adjusting the angle of the liquid
crystal panel
The angle of the liquid crystal panel can be
adjusted depending on the mounting angle of the
unit or light coming into the car.
1. Turn the power on. When the liquid crystal
panel is closed, press the [
OPEN/CLOSE
]
button.
2. Touch the [
o
(Eject)] key to display the
following Eject screen:
3. Repeat touching the [
Tilt
] key to adjust the
angle of the liquid crystal panel. Every
touching the [
Tilt
] key tilts the liquid crystal
panel forward or backward.
The adjusted angle is stored in memory.
• Adjustment is possible within the range 70
q
to 110
q
.
• There are 5 adjustable angles available.
4. When the adjustment is finished, touch the
[
Back
] key to return to the previous screen.
Housing the liquid crystal panel
1. Press the [
OPEN/CLOSE
] button.
The liquid crystal panel is housed
automatically.
Note:
•
When leaving this unit unused for a long period of
time or leaving your car, be sure to house the liquid
crystal panel.
Turning the liquid crystal panel
horizontal (Air conditioner operation
mode)
When the way the liquid crystal panel is mounted
hinders the operation of the air conditioner, the
position of the panel can be turned horizontal
temporarily.
1. Keep pressing the [
OPEN/CLOSE
] button
more than 2 seconds when the liquid crystal
panel is open.
A beep sounds and the liquid crystal panel
turns horizontal.
• Press the [
OPEN/CLOSE
] button again for
the panel to return to the original position.
• The unit can be set so that the panel returns
to the original position after a set time in the
horizontal position (see page 48).
Turning the Audio OFF
You can turn off all of the AV features.
1. Press the [
SRC
] button to display the Source
screen.
2. Touch the [
Audio Off
] key.
The AV features are turned off.
Turning the AV features on
1. Press the [
SRC
] button to display the Source
screen.
2. Touch the desired Source key.
The AV features are turned on, and the
system enters into the specified mode.
70˚
MAX 110°
