Clarion ProAudio VRX 935VD VRX935VD VRX935VD Скачать руководство пользователя

Страница: 18 / 69

VRX935VD

English

Owner

’s

manual

Opening and turning the display

20˚

Basic Operations

WARNING

• To prevent the battery from going dead,

operate this unit with the engine
running, if possible.

• When the liquid crystal panel is operating,

be careful not to get your hand or finger
caught between the panel and main unit
or the instrument panel of the car.

Standing up the liquid crystal panel

1. Press the [

OPEN

] button and the liquid

crystal panel comes out and stand up
automatically.

∗

While the liquid crystal panel is opening or
closing, the LED of the [

FUNC

] button blinks.

Note:

• If the liquid crystal panel stops in the middle of its

operation, press the

[OPEN]

button to house the

panel and press the button again to stand it up.
The unit enters the same display mode as the
display was turned off the last time.

Adjusting the angel, etc. of the
liquid crystal panel

The angle of the liquid crystal panel or
protruding amount of the panel from the
mounting surface can be adjusted depending on
the mounting angle of the unit or light coming
into the car.

●

To adjust the angle

1. Every time the [

TILT

] button is pressed, the

liquid crystal panel tilts forward or backward
at up to about 20 degrees. The adjusted
angel is stored in memory.

Note:

• Do not move the liquid crystal panel by hand.

●

To adjust the slide position

1. Press and hold the [

TILT

] button and release

when a beep is heard.

The liquid crystal panel slides forward or
backward. The adjusted slide position is
stored in memory.

There are 3 adjustable positions available on
this panel.

Housing the liquid crystal panel

1. Press the [

OPEN

] button and the liquid

crystal panel is housed automatically.

Note:

• When leaving this unit unused for a long period of

time or leaving your car, be sure to house the
liquid crystal panel into the main unit.

Содержание ProAudio VRX 935VD VRX935VD VRX935VD






































































Результаты поиска

Содержание ProAudio VRX 935VD VRX935VD VRX935VD

Отзывы:

Похожие инструкции для ProAudio VRX 935VD VRX935VD VRX935VD

Бренды по названию

Популярные бренды

Clarion ProAudio VRX 935VD VRX935VD VRX935VD, Инструкция для владельца и по установке

Результаты поиска

Содержание ProAudio VRX 935VD VRX935VD VRX935VD

Отзывы:

Похожие инструкции для ProAudio VRX 935VD VRX935VD VRX935VD

Бренды по названию

Популярные бренды