56
VRX935VD
English
Owner
’s
manual
●
SPEAKER GAIN
This function sets speaker output level.
∗
This function is not available for speakers whose
“
SPEAKER SEL
” setting is set to OFF.
3-1. Touch the [
SPEAKER GAIN
] key to show
the submenu.
3-2. Touch the [
FRONT L
], [
CENTER
],
[
FRONT R
], [
SURROUND R
],
[
SURROUND L
] or [
SUB WOOFER
] key
to set respective item.
3-3. Touch the [
w
] or [
z
] key to make
adjustments in the range -10 dB to +10 dB
in 1 dB step increments. The default value
is “
0 dB
”.
●
DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
∗
This function is not available for speakers whose
“
SPEAKER SEL
” setting is set to OFF.
3-1. Touch the [
DELAY
] key to show the
submenu.
3-2. Touch the [
CENTER SP
] or [
SURROUND
SP
] key to set respective item.
3-3. Touch the [
w
] or [
z
] key to adjust.
[
CENTER SP
]:
Adjustments are made in the range 0 ms
to 5 ms. The default value is “
0 ms
”.
[
SURROUND SP
]:
Adjustments are made in the range 0 ms
to 15 ms. The default value is “
0 ms
”.
●
DOLBY D
This function sets the dynamic range
compression.
∗
This function is not available for speakers whose
“
SPEAKER SEL
” setting is set to OFF.
3-1. Touch the [
DOLBY D
] key to show the
submenu.
3-2. Touch the [
MAX
], [
STD
] or [
MIN
] key to
select respective item.
∗
The default value is “
MAX
”.
4.
When all settings are completed, press the
[
ADJ
] button or touch the [
RTN
] key to
return to the previous mode.
●
PL
II
Control
∗
This function is available only when the MUSIC
MODE is selected for Dolby PL
II
. For setup
details, see “
Selecting the Dolby PL
II
(Dolby
Pro Logic
II
) type.
”
3-1. Touch the [
PL
II
CONTROL
] key to show
the submenu.
3-2. Touch the [
PANORAMA
], [
DIMENSION
] or
[
CENTER WIDTH
] key to select respective
item.
[
PANORAMA
]:
Touch the [
ON
] or [
OFF
] key. “
OFF
” is the
default value.
[
DIMENSION
]:
Touch the [
w
] or [
z
] key to make
adjustments between 0 and 6. The default
value is “
3
”.
[
CENTER WIDTH
]:
Touch the [
w
] or [
z
] key to make
adjustments between 0 and 7. The default
value is “
3
”.
●
FILTER
This function is used to select filter frequencies
that suit the speakers that are used.
∗
This function is not available for speakers whose
“
SPEAKER SEL
” setting is set to OFF.
3-1. Touch the [
FILTER
] key to show the
submenu.
3-2. Touch the [
FRONT HPF
], [
CENTER HPF
],
[
SURROUND HPF
] or [
SUB WOOFER
LPF
] key to set respective item.
3-3. Touch [
w
] or [
z
] key to make settings.
[
FRONT HPF
]:
This function can be set to the following
four settings: 50 Hz, 80 Hz, 120 Hz or
THROUGH. “
THROUGH
” is the default
value.
[
CENTER HPF
]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“
120 Hz
” is the default value.
[
SURROUND HPF
]:
This function can be set to the following
four settings: 50 Hz, 80 Hz, 120 Hz or
THROUGH. “
THROUGH
” is the default
value.
[
SUB WOOFER LPF
]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“
120 Hz
” is the default value.
5.1ch Surround Decoder Operations