VRX935VD
57
English
Owner
’s
manual
5.1ch Surround Decoder Operations
Output adjustment of subwoofer
volume, center volume and balance/
fader
1. Press the [
A-M
] button and touch the
[
DETAIL
] key.
2. To make an adjustment on :
●
Subwoofer volume adjustment
2-1. Touch the [
SUBWOOFER VOL
] key, then
touch the [
w
] or [
z
] key to adjust to
desirable level.
∗
The factory default setting is “
0
”. (Setting
range : -6 to 3)
●
Center volume adjustment
2-1. Touch the [
CENTER VOL
] key, then touch
the [
w
] or [
z
] key to adjust to desirable
level.
∗
The factory default is “
0
”. (Setting range : -6
to 0)
●
Balance/Fader adjustment
2-1. Touch the [
BAL/FAD
] key.
Touch the [
w
] or [
z
] key to adjust the balance
level.
[
w
] key : emphasized the sound from the
front speakers.
[
z
] key : emphasized the sound from the
rear speakers.
2-2. Touch the [
Å
] or [
Î
] key to adjust the fader
level.
[
Å
] key : emphasized the sound from the
left speakers.
[
Î
] key : emphasized the sound from the
right speakers.
3. When the adjustment is complete, touch the
[
RTN
] key or press the [
A-M
] button to return
to the STANDARD screen.
DSF mode
DSF effect ON/OFF
∗
The factory default setting is “
OFF
”.
1. Press the [
A-M
] button.
2. Touch the [
STATUS
] key.
3. Touch the [
DSF
] key to select “
on
” and “
off
”.
4. Each time the [
ON/OFF
] key is touched, the
on and off statuses are switched alternately.
5. After the setting, press the [
A-M
] button
again or touch the [
RTN
] key to return to the
STANDARD screen.
Note:
• If the DSF effect is set to OFF, the adjustment
made in “
DSF
” is not reflected in the music source.
Selecting the DSF type
1. Press the [
A-M
] button and touch the [
DSF
] key.
2. Touch the key for the desirable type to select it.
3. When the setting is finished, touch the [
RTN
]
key or press the [
A-M
] button to return to the
previous mode.
P.EQ mode
P.EQ effect ON/OFF
∗
The factory default setting is “
OFF
”.
1. Press the [
A-M
] button.
2. Touch the [
STATUS
] key.
3. Touch the [
P.EQ
] key to select “
on
” and “
off
”.
4. Each time the [
ON/OFF
] key is touched, the
on and off statuses are switched alternately.
5. After the setting, press the [
A-M
] button
again or touch the [
RTN
] key to return to the
STANDARD screen.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “
P.EQ
” is not reflected in the music
source.