58
VRX935VD
English
Owner
’s
manual
5.1ch Surround Decoder Operations
Setting and storing P.EQ Properties
1. Press the [
A-M
] button to show the AUDIO
MODE menu.
2. Touch the [
P.EQ
] key to show the P.EQ
adjusting display.
3. Touch the key for the desirable type to select it.
The P.EQ adjustment contents are as
follows:
●
SIGNAL
∗
The factory default setting is “
P.NOISE
”.
This function selects [
P. NOISE
] or [
MUSIC
].
●
SPEAKER SELECT
∗
The factory default setting is “
FRONT
”.
This function selects [
FRONT
], [
CENTER
] or
[
SURROUND
].
●
“BAND”
∗
The factory default setting is “
BAND1
”.
Select the channel to be compensated
(BAND1, BAND2, BAND3).
●
“FREQUENCY”
∗
The factory default setting is “
1 kHz
”.
Select the center frequency that you want to
compensate from the range of 20 Hz to 20
kHz. (1/3 octave step, 31 points)
●
“Q”
∗
The factory default setting is “
1
”.
Set the sharpness of the Q-curve to one of
the parameters: 1, 3, 5, 7 and 20.
●
“GAIN”
∗
The factory default setting is “
0
”.
Adjust the gain (output level) in the range of -
12 dB to +12 dB. (1 dB step, 25 points)
4. After making adjustments to a desired
pattern by repeating the operations of item3,
touch the [
RNT
] key or press the [
A-M
]
button to return to the previous mode.
Selecting the Dolby PL
II
(Dolby Pro
Logic
II
) type
1. Press the [
A-M
] button and touch the [
Dolby
PL
II
] key.
2. Touch the key for the desirable type to select
it.
3. When the setting is finished, touch the [
RTN
]
key or press the [
A-M
] button to return to the
previous mode.
∗
The factory default is “
off
”.
