Clarion NX501A, Руководство пользователя

Страница: 82 / 138

22 NX501A English
3 Navigating
You can set up your route in different ways:
x
If you need a route for immediate navigation, you can select the destination and start
navigating to it right away (normal navigation).
x
You can also plan a route independently of your current GPS position or even without
GPS reception (to achieve this, you need to turn off the GPS receiver and set a new
starting point in My Route / Edit Route by tapping the flag icon at the current position).
You can plan routes with multiple destinations. Select the first destination. Then select a
second destination and add it to your route to create a multi-point route. You can add as
many destinations to your route as you like.
3.1 Selecting the destination of a route
Clarion Mobile Map offers you several ways of choosing your destination:
x
Enter a full address or a part of an address, for example a street name without a house
number or the names of two intersecting streets (page 22).
x
Enter an address with postal code (page 29). This way you do not need to select the
name of the city/town and the search for street names might be faster as well.
x
Use a built-in Place of Interest as your destination (page 32).
x
Select a location on the map with the Find on Map feature (page 43).
x
Use a previously saved Favourite destination (page 44).
x
Select a location from the History of previously used destinations (page 46).
x
Enter the coordinate of the destination (page 46).
x
Use the location where a photo was taken (page 48).
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to select the destination of the
route.
Using the same screen, you can find an address by entering:
x
the exact address, including house number
x
the centre of a city/town
x
an intersection
x
the midpoint of a street
x
any of the above, starting the search with the postal code (page 29)
3.1.1.1 Entering an address
To enter an address as the destination, do as follows: