Claind AirGen, Руководство пользователя

Страница: 12 / 35

Installation
12
• position the generator on the base paying attention that the location respect the
height decrease of it;
• fasten the generator to the base (on the rear) using the screws and the anchor
plate included in the supply;
• remove the front panel and insert the check pline in the apposite holes;
• the generator shall protrude of almost 20 cm so that the linchpins can be blocked
by elastic splines.
4.3.
Pneumatic connections
4.3.1.
Air inlet
m
The compressed air supply to the generator may not exceed 10.5 bar
(152 psi).
CONNECTION
• Locate the compressed air inlet, marked “AIR INLET” at the rear of the genera-
tor;
• take fitting (1,2) and mount it;
• connect the line.
1
2