Claind AirGen, Руководство пользователя

Страница: 16 / 35

Disassembly and transport
16
4.7.
Warnings
e
If a failure in gas supply (due to a power failure, activation of an electrical safety
device, or generator fault), even temporary, is not admissible, a pneumatic panel
should be envisaged, to enable provisional activation of a reserve gas source (to-
tally or partially automatic).
4.8.
Packaging disposal
It is recommended to store the original packaging to ensure adequate protection
for the purifier when moved in the future.
5.
Disassembly and transport
5.1.
Disassembly
• Stop the generator
(par. 6.7.);
• wait for depressurization (about a minute);
• switch off the generator
(par. 6.8.);
• disconnect the electric power cable;
• close all valves (air inlet, tanks) and detach the pneumatic connections.
5.2.
Transport
e
Remember that during transport the generator must always remain in a vertical
position.
If conserved, use the original packaging; otherwise use a pallet of adequate di-
mensions to hold the generator, affixing instructions in visible locations, such as:
THIS WAY UP, KEEP IN VERTICAL POSITION.