City Theatrical SHoW DMX Neo 5701, Инструкция по установке и эксплуатации

Страница: 62 / 71

62
After power-up the LCD display will read:
SHoW DMX Rx
SHoW ID: X
alternating with:
SHoW DMX Rx
IN/OUT of Range
and:
Signal: -XXXdBm
The Start Up display reports RF connection status (“In Range” or “Out of Range”), reports the
SHoW ID that the Receiver is configured for (see RF Settings Below), and reports the RF signal
strength.
Press the center ENTER button to access the menus.
SHoW ID
Set the SHoW ID number to match the number calculated by the Transmitter.
The Transmitter and Receiver SHoW IDs must match for the units to communicate.
SHoW ID
Set the SHoW ID number to match the number calculated by the Transmitter.
The Transmitter and Receiver SHoW IDs must match for the units to communicate.
RDM Settings
The RDM Settings Menu controls the RDM settings for the Receiver.
RDM Proxy Disabled/Enabled:
Enables or Disables the RDM features.
Power:
Select the desired RF transmit power setting. For the 5610 (North American) the
available power settings are 5mW, 10mW, 50mW, 100mW, or 125mW FCC. For the
5611, the power settings are 5mW, 10mW, 50mW or 100mW ETSI.
RDM Label:
This is an editable field that allows the user to create a unique alpha-
numeric 32 character RDM label for the unit.
Devices Found:
Indicates the number of RDM responder devices discovered by the
Receiver.
RDM Unique ID:
This is a non-editable field that displays the RDM Unique ID.