City Theatrical SHoW DMX Neo 5701, Инструкция по установке и эксплуатации

Страница: 55 / 71

55
About SHoW ID:
CTI’s SHoW ID system organizes most of the SHoW DMX RF features into a set of simple
settings that allow you to match your transmitter to your receiver(s) and to quickly select Neo,
Neo Adaptive, Or Classic modes, as well as Full or Limited Bandwidth and Hopping pattern
settings.
Once the transmitter’s hopping pattern and bandwidth are configured, the transmitter will
calculate and display a unique
SHoW ID . Set the receiver to that same SHoW ID to configure it
to respond to that Transmitter.
The transmitter and receiver SHoW IDs must match for the units to communicate.
The 5701 SHoW DMX Neo Transceiver’s top label includes a list of the primary menus:
Transceiver Menus
The Main Menu reads:
SHoW DMX Neo
Æ
[Active Input]
The SHoW DMX Neo Transceiver can be connected to one or more control inputs, combining
DMX and Ethernet input levels on an HTP (Highest Takes Precedence) basis.
Connected Inputs are displayed in the Active Input window.
[status] Status messages will vary with the input control method selected
(
Æ
) indicates that there is more information available by pressing the Right button.
Pressing the Enter button will access the next level of menus and then the options and
submenus are viewed using the up and down buttons (as detailed above).