City Theatrical SHoW DMX Neo 5701, Инструкция по установке и эксплуатации

Страница: 60 / 71

60
The 5711 SHoW DMX Neo Receiver Configuration Guide
The 5711 SHoW DMX Neo Receiver
Since the 5711 SHoW DMX Neo Receiver is configurable as a half duplex RDM Responder, it is
capable of transmitting as well as receiving when used in the RDM mode.
Controls, Connections and Features
Front Panel
LCD Display: This 2 line by 16 character display shows all of the Menu titles, command options,
configuration data, and other text and graphic data. The backlight turns on whenever a button is
pushed and turns off automatically after a preset time-out. The backlight off time-out is
adjustable via the Misc. Menu (see below).
Control Button Pad: This five-button pad is the main control interface
for the 5610/5611 Receiver. The button functions are UP, DOWN,
LEFT/BACK, RIGHT/FORWARD, and ENTER.
Back Panel
DC Power Input Jack: This is the +12VDC power input for the 5711 SHoW DMX Neo Receiver,
and mates directly with the plug on the CTI 5627 power supply, as well as the CTI # 5650
Battery Twofer. The 5711’s internal power circuit will work with any +DC voltage power supply
from 9 to 24VDC, allowing a wide range of battery power options. This connector’s polarity is
Ring- / Tip+.
Be sure the power connection is polarized correctly before connecting an
alternative supply.
IEC Mains power Input connector: The 5711 SHoW DMX Neo Receiver can be powered with
100-240VAC 50/60 Hz mains power. Connect the provided IEC tail to this connector for use with
mains power.
ENT
UP
DOWN
R
I
G
H
T
L
E
F
T