CITROËN C5 2013, Руководство пользователя

Страница: 192 / 315

166
P R A C T I C A L I N F O R M A T I O N
Removing a wheel

Park the vehicle on stable, fi rm
ground that is not slippery. apply
the parking brake.

If your vehicle is equipped with
"Hydractive III+" suspension,
with the engine running at idle,
adjust the ground clearance to
its maximum height.

Switch off the ignition and en-
gage fi rst gear or reverse gear
depending on any slope (for a
vehicle with automatic gearbox,
select position P ).

If your vehicle is fi tted with
"Hydractive III+" suspension,
position the chock, whichever di-
rection the gradient may be in, in
front of the front wheel diametri-
cally opposite to the one to be
replaced.

Position the jack at one of the
four jacking-points provided
on the subframe close to the
wheels, then use the handle to
unwind the jack until it reaches
the ground.

Remove the protector from each
bolt using tool 3 .

Slacken the wheel bolts.
Before positioning the
jack:

Always adjust the vehicle’s
ground clearance to the "maxi-
mum height" position and re-
tain this adjustment for as long
as the jack is under the vehicle
(do not use the hydraulic ad-
justments),

Immobilise your vehicle on hor-
izontal, stable and non-slippery
ground,

Ensure that any passengers
have left the vehicle and are in
a safe place .
Never get underneath the vehicle if
it is supported only by the jack.
The jack and all of the tools are
specifi c to your vehicle. Do not use
them for any other applications.
Have the original wheel repaired
and refi tted as soon as possible.

Continue to extend the jack until
the wheel is a few centimetres
off the ground.

Undo the bolts, remove the
wheel.