Citizen CLP 7202e, Руководство пользователя

Страница: 49 / 82

Chapter 4 Printer Adjustments
48
1 Use of Media Other Than the Recommended
(Printhead Offset Adjustments - Media Thickness Adjustments)
The printer is already factory-set to the requirements of proper print quality while using the
recommended labels. If the print quality is inferior because of the different type of media, adjust the
printhead offset in the following manner:
(a) When using standard
labels, or thermal media
(1) Looking in at the offset
check window, reset the
printhead offset so that it
comes to the center line
(middle of the three lines)
by turning the offset
adjustment screw with a
screwdriver.
Then turn the offset
adjustment screw two to
four times counterclockwise
with a screwdriver. (Factory
setting: two turns.)
(2) Make fine adjustments by
checking the self-test print.
(b) When using thick media
(tags or other media)
(1) Looking in at the offset
check window, reset the
printhead offset so that it
comes to the center line
(middle of the three lines)
by turning the offset
adjustment screw with a
screwdriver.
(2) Then turn the offset
adjustment screw two to
four times clockwise with a
screwdriver.
(3) Make fine adjustments by
checking the self-test print.
1 Use of Media Other Than the Recommended (Printhead Offset Adjustments - Media Thickness Adjustments)