Cissell FINTUNMAN67, Руководство пользователя

Страница: 11 / 41

Page 11
DOOR INTERLOCK
SWITCH ADJUSTMENT
1. With doors in closed position the switch should be set as shown in Figure “A”.
2. Figure “B” shows correct cam and roller alignment with doors in open position. To
check cam and roller alignment press start button and when the doors stop in the
open position, turn off main power switch. Check to see that the roller is centered
in the notch on the cam hub. If the cam has not rotated a full 180º to allow roller to
drop into notch, adjust the switch clockwise (up) approximately 1/16”. If the cam
has rotated more than 180º, adjust the switch counter clockwise (down)
approximately 1/16”. Repeat until roller drops into notch.