SPA and Wireless IP Phone Field Reference
Attendant Console Status
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
260
B
For more information, see
Chapter 9, “Configuring the Cisco SPA500S
Attendant Console.”
.
Unit 2
See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second Cisco
SPA500S unit. Keywords and values are case-sensitive. The configuration script is
described in the
“Setting Up the Cisco SPA500S Attendant Console” section
on page 164
.
Attendant Console Status
This page provides two tabs to display the status of up to two Cisco SPA500S
units that are supported by a single IP phone:
•
Unit 1—Displays information about the first Cisco SPA500S unit.
•
Unit 2—Displays information about the second Cisco SPA500S unit.
Each tab provides the read-only fields described in the following table:
Unit 1 Key 1-32
Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA500S unit. Keywords and values are
case-sensitive. The configuration script is described in
the
“Unit/Key Configuration Scripts” section on
page 168
.
Parameter
Description
Parameter
Description
Unit Enable
Displays if the Unit is enabled or disabled.
Subscribe Expires
Displays when the current subscription expires. After
the subscription expires, the Cisco SPA500S
automatically requests a new subscription.
HW Version
Displays the version of the hardware.
