Getting Started
Upgrading Firmware
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
10
1
STEP 3
Locate the download page and download the firmware file.
STEP 4
If the firmware file you download is in zip format, double-click the file and extract
its contents to a single folder or to the desktop.
Installing the Firmware
NOTE
Your computer must be on the same sub-network as the phone you are upgrading.
SPA50XG:
STEP 1
Run the executable file for the firmware upgrade.
STEP 2
Click Continue after reading the message regarding upgrading and your service
provider.
STEP 3
Enter the IP address of your phone.
STEP 4
Follow the on-screen directions.
SPA525G
STEP 1
Log in to the web interface for the phone.
STEP 2
Choose the Firmware Upgrade tab.
STEP 3
Click Firmware Upgrade Window.
STEP 4
Browse to select the firmware file from your PC. Click Submit. The firmware is
installed and your phone reboots.
WIP310
STEP 1
Turn off your WIP310 and connect it to your computer by using the USB cable.
STEP 2
Double-click the executable file for the firmware upgrade (for example, double-
click wip310-5-0-11.exe).