SPA and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
205
B
•
Miscellaneous, page 218
Call Progress Tones
Parameter
Description
Dial Tone
Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Bluetooth Dial Tone
(SPA525G only)
Ton e that indicates a bluetooth headset is on and the
user can make a call.
Defaults to 350@-19,440@-19;1(0/*/0);10(*/0/1+2).
Outside Dial Tone
Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompt Tone
Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).
Busy Tone
Played when a 486 RSC is received for an outbound
call.
Defaults to 480@-19,620@-19;10(.5/.5/1+2).
Reorder Tone
Played when an outbound call has failed or after the far
end hangs up during an established call. Reorder Tone
is played automatically when <Dial Tone> or any of its
alternatives times out.
Defaults to 480@-19,620@-19;10(.25/.25/1+2).
Off Hook Warning Tone
Played when the caller has not properly placed the
handset on the cradle. Off Hook Warning Tone is
played when Reorder Tone times out.
Defaults to 480@10,620@0;10(.125/.125/1+2).
Ring Back Tone
Played during an outbound call when the far end is
ringing.
Defaults to 440@-19,480@-19;*(2/4/1+2).
