manualshive.com logo in svg

Cisco Universal Broadband Router Cisco uBR10012, Руководство по настройке программного обеспечения

Универсальный широкополосный маршрутизатор Cisco uBR10012 предлагает множество возможностей для настройки программного обеспечения. Вы можете бесплатно загрузить Руководство по настройке программного обеспечения на manualshive.com. Получите подробное описание продукта и инструкции по использованию, чтобы максимизировать его потенциал.

Поделиться
Скачать
background image

1-36

Cisco uBR10012 Universal Broadband Router Software Configuration Guide

OL-1520-05

Chapter 1      Overview of Cisco uBR10012 Universal Broadband Router Software

Supported Software Features for the Cisco uBR10012 Router

Commands

Router# 

show interface cable 

x/

0 service-flow

 [

sfid

]

 phs

 

Router# 

debug cable error

 

Router# 

debug cable phs

 

For additional command information, refer to the 

Cisco Broadband Cable Command Reference Guide

 

on Cisco.com.

DOCSIS 1.1 Quality of Service Support

Enhanced quality of service (QoS) gives priority for real-time traffic such as voice and video. 

  •

The DOCSIS 1.0 QoS model (a service ID (SID) associated with a QoS profile) has been replaced 
with a service flow model that allows greater flexibility in assigning QoS parameters to different 
types of traffic and in responding to changing bandwidth conditions. 

  •

DOCSIS 1.1 offers support for multiple service flows per CM, which allows a single CM to support 
a combination of data, voice, and video traffic. 

  •

DOCSIS 1.1 offers greater granularity in QoS per CM in either direction, using unidirectional 
service flows. 

  •

Dynamic MAC messages create, modify, and delete traffic service flows to support on-demand 
traffic requests 

  •

Supported QoS models for the upstream are:

  –

Best-effort—Data traffic sent on a non-guaranteed best-effort basis

  –

Committed Information Rate (CIR)—Guaranteed minimum bandwidth for data traffic

  –

Unsolicited Grants (UGS)—Constant bit rate (CBR) traffic, such as voice, that is characterized 
by fixed size packets at fixed intervals 

  –

Real-Time Polling (RTPS)—Real-time service flows, such as video, that produce unicast, 
variable-size packets at fixed intervals 

  –

Unsolicited Grants with Activity Detection (USG-AD)—Combination of UGS and RTPS, to 
accommodate real-time traffic that might have periods of inactivity (such as voice using silence 
suppression). The service flow uses UGS fixed grants while active, but switches to RTPS polling 
during periods of inactivity, to avoid wasting unused bandwidth. 

The DOCSIS 1.1 QoS framework is based on the following objects:

  •

Service class—

A collection of settings maintained by the CMTS that provide a specific QoS service 

tier to a CM that has been assigned a service flow within a particular service class. 

  •

Service flow—

A unidirectional sequence of packets receiving a service class on the DOCSIS link. 

  •

Packet classifier—

A set of packet header fields used to classify packets onto a service flow to 

which the classifier belongs. 

  •

PHS rule—

A set of packet header fields that are suppressed by the sending entity before 

transmitting on the link and that are restored by receiving entity after receiving a header-suppressed 
frame transmission. Payload Header Suppression increases the bandwidth efficiency by removing 
repeated packet headers before transmission. 

In DOCSIS 1.1, the basic unit of QoS is the service flow, which is a unidirectional sequence of packets 
transported across the RF interface between the CM and CMTS. A service flow is characterized by a set 
of QoS parameters such as latency, jitter, and throughput assurances. 

Every CM establishes a primary service flow in both the upstream and downstream directions. The 
primary flows maintain connectivity between the CM and CMTS at all times. 

In addition, a DOCSIS 1.1 CM can establish multiple secondary service flows. The secondary service 
flows either can be created permanently (they persist until the CM is reset or powered off) or can be 
created dynamically to meet the needs of the on-demand traffic being transmitted. 

Содержание Universal Broadband Router Cisco uBR10012

















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Universal Broadband Router Cisco uBR10012

GE 90-30 PLC User Manual preview
90-30 PLC
Бренд: GE Страницы: 93
Omnia Volt Quick Start Installation Manual preview
Volt
Бренд: Omnia Страницы: 6
H3C S5120V3-EI Series Manual preview
S5120V3-EI Series
Бренд: H3C Страницы: 54
Ublox LENA-R8 Series System Integration Manual preview
LENA-R8 Series
Бренд: Ublox Страницы: 116
H3C CR16000-M Installation Manual preview
CR16000-M
Бренд: H3C Страницы: 116
Stanwax Laser ILDA Gem Laser projector tool Instructions preview
ILDA Gem Laser projector tool
Бренд: Stanwax Laser Страницы: 3
QNAP TS-1283XU-RP User Manual preview
TS-1283XU-RP
Бренд: QNAP Страницы: 54
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Бренд: QNAP Страницы: 51
Longshine LCS-8170 User Manual preview
LCS-8170
Бренд: Longshine Страницы: 35
ZALMAN CNPS11X Extreme User Manual preview
CNPS11X Extreme
Бренд: ZALMAN Страницы: 12
Renesas H8S/2437 Hardware Manual preview
H8S/2437
Бренд: Renesas Страницы: 746
Concept Pro DEEP LEARNING PLUS Quick Start Manual preview
DEEP LEARNING PLUS
Бренд: Concept Pro Страницы: 28
Keithley DAS-1800HR Series User Manual preview
DAS-1800HR Series
Бренд: Keithley Страницы: 139
Intel SRCU31L Quick Start Manual preview
SRCU31L
Бренд: Intel Страницы: 20
Cleerline SSF Quick Start Manual preview
SSF
Бренд: Cleerline Страницы: 2
Renesas PROM Programming Adapters PCA7438F-64A User Manual preview
PROM Programming Adapters PCA7438F-64A
Бренд: Renesas Страницы: 18
ADLINK Technology AMSTX-CF Series User Manual preview
AMSTX-CF Series
Бренд: ADLINK Technology Страницы: 73
Calix GigaSpire BLAST u4hm Installation Manual preview
GigaSpire BLAST u4hm
Бренд: Calix Страницы: 45

Бренды по названию

Популярные бренды

Загрузить еще бренды