manualshive.com logo in svg

Cisco Universal Broadband Router Cisco uBR10012, Руководство по настройке программного обеспечения

Универсальный широкополосный маршрутизатор Cisco uBR10012 предлагает множество возможностей для настройки программного обеспечения. Вы можете бесплатно загрузить Руководство по настройке программного обеспечения на manualshive.com. Получите подробное описание продукта и инструкции по использованию, чтобы максимизировать его потенциал.

Поделиться
Скачать
background image

1-31

Cisco uBR10012 Universal Broadband Router Software Configuration Guide

OL-1520-05

Chapter 1      Overview of Cisco uBR10012 Universal Broadband Router Software

Supported Software Features for the Cisco uBR10012 Router

40-bit and 56-bit Baseline Privacy Data Encryption Standard (DES) 

The Cisco uBR10012 router supports 40-bit and 56-bit encryption and decryption. When encryption and 
decryption is enabled, 56-bit is the default. If necessary, administrators can force the 
Cisco uBR10012 router to generate a 40-bit DES key, where the DES key that is generated and returned 
masks the first 16 bits of the 56-bit key to zero in software. 

Note

BPI+ encryption and authentication must be supported and enabled by both the CM and CMTS. In addition, 
the CM must contain a digital certificate that conforms to the DOCSIS 1.1 and BPI+ specifications. 

Access Lists (Per-Modem and Per-Host)

Per-modem and per-host access lists allow the Cisco uBR10012 router to filter incoming packets from 
individual hosts or cable interfaces based on the source MAC or IP address. This allows access lists to 
be specified on a per-interface or a per-address basis. 

You can preconfigure the filters by using the CLI, following standard Cisco IOS access list and access 
group configuration procedures. You can assign these filters to a user or modem by using the CLI or 
SNMP. The feature also supports traps to inform the CMTS about the online or offline status of modems.

Access Lists on the Cisco uBR10012 Router

The Parallel eXpress Forwarding (PXF) processors on the Cisco uBR10012 router provide the increased 
performance of Turbo Access Control Lists (Turbo ACL) by default by automatically compiling all 
access lists when access lists are configured. 

You do not need to use the 

access-list compiled

 command to enable the Turbo ACL feature. To display 

access lists, use the 

show access-lists

 command without specifying the 

compiled

 option. 

For complete information about access lists, see the "Traffic Filtering and Firewall" volume in the 

Cisco 

IOS Release 12.1 Security Configuration Guide

 at the following URL: 

http://www.cisco.com/en/US/docs/ios/12_1/security/configuration/guide/scdacls.html 

Authentication

DOCSIS 1.1 offers advanced authentication and security through X.509 digital certificates and Triple 
Data Encryption Standard (3DES) key encryption.

Cisco IOS Firewall 

The Cisco uBR10012 router support Network Address Translation (NAT) and firewall functionality. 
Additional NAT documentation is available online at 

http://www.Cisco.com

. 

CM and Host Subnet Addressing

This feature enables the Cisco uBR10012 router to manipulate the GIADDR field of DHCPDISCOVER 
and DHCPREQUEST packets with a Relay IP address before they are forwarded to the DHCP server. 
By modifying the GIADDR field based on whether the source is a CM or a host, the 
Cisco uBR10012 router provides hints to the DHCP server as to where—on which IP subnet—the server 
should allocate addresses to the requesting client.

Upstream Address Verification

This feature prevents the spoofing of IP addresses. Using the CLI, administrators can determine the IP 
and MAC address of a given cable interface, and the SID number that shows the IP and MAC addresses 
of all devices learned in the cable interface’s MAC table. 

The CMTS verifies the source IP address against the MAC address for the CM. CM and PC IP addresses 
are verified to ensure that SID and MAC addresses are consistent. A PC behind a cable interface is 
assigned an IP address from the DHCP server. If a user on a second PC or cable interface statically 
assigns the same IP address to a PC, the Cisco uBR10012 router reports this. Using customer databases, 
administrators can cross-reference the spoofing CM and PC to prevent further usage. 

Содержание Universal Broadband Router Cisco uBR10012

















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Universal Broadband Router Cisco uBR10012

D-Link DSL-500 Quick Start Manual preview
DSL-500
Бренд: D-Link Страницы: 11
D-Link DHP?P309AV Setup Manual preview
DHP?P309AV
Бренд: D-Link Страницы: 8
D-Link AirPlus DWL-810 Quick Installation Manual preview
AirPlus DWL-810
Бренд: D-Link Страницы: 8
D-Link DFE-690TXD Quick Install Manual preview
DFE-690TXD
Бренд: D-Link Страницы: 12
D-Link DHP-601AV Quick Installation Manual preview
DHP-601AV
Бренд: D-Link Страницы: 84
Patton electronics 3210 Specification Sheet preview
3210
Бренд: Patton electronics Страницы: 2
Ebyte E43-900T13S3 Manual preview
E43-900T13S3
Бренд: Ebyte Страницы: 8
JCG Q8 Quick Start Manual preview
Q8
Бренд: JCG Страницы: 2
Profile LS901-E1 Instruction Manual preview
LS901-E1
Бренд: Profile Страницы: 6
Pima ZEL508 Installation Instructions preview
ZEL508
Бренд: Pima Страницы: 4
Tripp Lite N125-010-GY Specification Sheet preview
N125-010-GY
Бренд: Tripp Lite Страницы: 2
Variscite VAR-EXT-CB105 Datasheet preview
VAR-EXT-CB105
Бренд: Variscite Страницы: 18
UfiSpace S9700-23D Hardware Installation Manual preview
S9700-23D
Бренд: UfiSpace Страницы: 32
AOpen VA1000 Lite2 User Manual And Technical Manual preview
VA1000 Lite2
Бренд: AOpen Страницы: 18
eWON 2101CD Installation Manual preview
2101CD
Бренд: eWON Страницы: 34
NETGEAR RH328 Reference Manual preview
RH328
Бренд: NETGEAR Страницы: 142
Idis DR-1204P Installation Manual preview
DR-1204P
Бренд: Idis Страницы: 22
Perle IOLAN MDC User Manual preview
IOLAN MDC
Бренд: Perle Страницы: 491

Бренды по названию

Популярные бренды

Загрузить еще бренды