Cisco UCS C240, Инструкция по установке и обслуживанию

Страница: 73 / 156

3-31
Cisco UCS C240 Server Installation and Service Guide
OL-25761-01z
Chapter 3 Maintaining the Server
Installing or Replacing Server Components
Figure 3-15 CPU Heatsink and Socket
Step 2
Remove a protective cap or an old CPU from the socket (if present):
•
If you are removing an old CPU, skip to Step 3 .
•
If you are installing a new CPU to a socket that was shipped empty, the socket has a protective cap
that is intended to prevent bent contact pins. Use the tool as shown in
Figure 3-16 to grasp the
protective cap and then pivot to remove the cap.
Figure 3-16 Protective Cap Removal Tool
Step 3
Remove an old CPU:
a.
Set the Pick-and-Place tool on the CPU in the socket, aligning the arrow on the tool with the
registration mark on the socket (the small triangular mark). See
Figure 3-17 .
b.
Press the top button on the tool to grasp the installed CPU.
c.
Lift the tool and CPU straight up.
d.
Press the top button on the tool to release the old CPU on an anti-static surface.
1
CPU retaining latch,
3
Hinged CPU cover plate
2
CPU retaining latch, –
1
3
2
332093
333565