S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
16
Cisco UCS B440 High Performance Blade Server Installation and Service Note
OL-22475-01
Removing a Blade Server Cover
Step 6
Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers
only is unlikely to lead to stripped or damaged captive screws.
Removing a Blade Server Cover
To open a blade server, follow these steps:
Step 1
Press and hold the button down as shown in callout 1 of
Figure 6
.
Step 2
While holding the back end of the cover, pull the cover back and upas shown in callout 2 of
Figure 6
.
Figure 6
Opening a Blade Server
196871
2
1
