Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide
83
4
Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)
Use the
Voice > Line 1
and
Voice > Line 2
pages to configure the settings for
calls through the PHONE 1 and PHONE2 ports.
or Line 2
Enter the settings as described below. After making changes, click
Submit
to save your settings, or click
Cancel
to redisplay the page with the saved
settings.
NOTE
In a configuration profile, the FXS parameters must be appended with the
appropriate numeral (for example, [1] or [2]) to identify the port to which the setting
applies.
Line Enable
Streaming Audio Server (SAS)
Force G722 Code
Dial prefix to make G.722 the only codec that can be used
for the call.
Default setting: *02722
Field
Description
Field
Description
Line Enable
To enable this line for service, select yes. Otherwise,
select no.
Default setting: yes
Field
Description
SAS Enable
To enable the use of the line as a streaming audio source,
select yes. Otherwise, select no. If enabled, the line cannot
be used for outgoing calls. Instead, it auto-answers
incoming calls and streams audio RTP packets to the
caller.
Default setting: no
