Administration Settings
Diagnostics
Cisco SPA100Series Administration Guide
119
5
Diagnostics
The ATA includes two built-in diagnostic tools:
•
Ping Test
•
Traceroute Test
Ping Test
Use the
Administration > Diagnostics > Ping Test
page to test connectivity
between the ATA and a destination.
STEP 1
Enter the IP address or domain name that you want to ping.
STEP 2
Enter a packet size in bytes. The range is 32 to 65500 bytes.
STEP 3
Choose the number of times to send the ping request (5, 10, or Unlimited).
STEP 4
Click
Start to Ping
to start the test. After the test is complete, the test results
appear on the page. While the ping test is running, you can click
Stop
to abandon
the test.
The test results indicate the number of packets sent and received, the percentage
of packet loss, and the round-trip speed.
STEP 5
Click
Close
to close the test results and display the
Ping Test
form.
Traceroute Test
Use the
Administration > Diagnostics > Traceroute
page to view the route
between the ATA and a destination.
STEP 1
Enter the IP address or domain name of the destination.
STEP 2
Click
Start to Traceroute
to start the test. The results appear on the page and are
refreshed every 5 seconds. During the test, you can click
Stop
to abandon the test.
The results display up to 30 hops.
STEP 3
Click
Close
to close the results and display the
Traceroute Test
form.
