Configuring the Network
Application (SPA122 Only)
Cisco SPA100Series Administration Guide
40
3
Manually Adding Port Forwarding (SPA122 Only)
Use this page to enter the port forwarding settings for an application.
Enter the settings as described below. After making changes, click
Submit
to save
your settings, or click
Cancel
to redisplay the page with the saved settings.
Field
Description
Port Forwarding
Type
Choose the type of port forwarding:
•
Single Port Forwarding
: Forwards traffic for a
specified port to the same or an alternative port
on the target server in the LAN
.
•
Port Range Forwarding
: Forwards traffic to a
range of ports to the same ports on the target
server in the LAN
.
see the Internet application’s
documentation for the required ports or ranges.
Application Name
For single port forwarding, choose a common
application from the drop-down list (such as Telnet, or
DNS).
To add an application that is not on the list, choose
Add
a new name
, and then enter the name in the
Enter a
Name
field.
Enter a Name
If you chose Port Range Forwarding, or if you chose
Add
a new name
in the
Application Name
list for Single Port
Forwarding, enter a name to identify the application.