Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000, Справочник по командам

Страница: 310 / 404

6-144
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib-agent switch
Table 6-53 describes the fields in the sl-vl-map keyword output.
Table 6-54 describes the switch info keyword output fields.
Table 6-53 sl-vl-map Keyword Output Field Descriptions
Field Description
node-guid GUID of the SMA node.
in-ib-port The ingress port of an InfiniBand data packet.
out-ib-port The egress port of an InfiniBand data packet.
SL to VL mapping For each service lane, show the underlying virtual lane which will be used for a
packet on the given ingress port, which will be routed out the given egress port.
Table 6-54 switch info Keyword Output Field Descriptions
Field Description
guid GUID of the SMA node.
lft-cap The current maximum used entry in the Linear Forwarding Table.
rft-cap The maximum capacity of the switch Random Forwarding Table. (This
capacity is generally unmet, since only one LFT or RFT is implemented on
any given switch and all Cisco SFS 7000 switches use the LFT.)
mft-cap The maximum capacity of the Multicast Forwarding Table.
lft-top The current maximum used entry in the Linear Forwarding Table.
default-port Port used if the Random Forwarding Table is implemented. This port is the
one to which packets are sent when the LID is not specified in the Random
Forwarding Table.
def-mcast-pri-port Default Multicast Primary Port—port to which multicast packets are sent
when the LID is not present in the Multicast Forwarding Table.
def-mcast-NP-port Default Multicast Not Primary Port—Same as above, but for multicast
packets arriving on the Default Multicast Primary Port.
life-time-value Specifies the maximum time a packet can live in the switch. See the
InfiniBand specification for the definition of this value.
port-state-change Indicates that a port on the switch has changed its state. Used by the subnet
manager to determine if it needs to look at the port states.
lids-per-port Specifies the number of LID/LMC combinations that may be used per port if
the Random Forwarding Table is implemented.
partition-enf-cap The number of entries in the Partition Enforcement Table per port.
inbound-enf-cap Indicates whether or not the switch is capable of partition enforcement on
inbound (received) packets.
outbound-enf-cap Indicates whether or not the switch is capable of partition enforcement on
outbound (transmitted) packets.
filter-raw-pkt-in-cap Indicates whether or not the switch is capable of raw packet enforcement on
inbound (received) packets.
filter-raw-pkt-out-cap Indicates whether or not the switch is capable of raw packet enforcement on
outbound (transmitted) packets.