Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000, Справочник по командам

Страница: 343 / 404

6-177
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface mgmt-ethernet
show interface mgmt-ethernet
To show the configuration of the Ethernet Management port on the controller card of your Server Switch,
enter the show interface mgmt-ethernet command in User Exec mode or Privileged Exec mode.
show interface mgmt-ethernet
Syntax Description
This command has no arguments or keywords.
Defaults
The gateway address value defaults to 0.0.0.0.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
The Ethernet Management port is an Out-of-Band Management (OBM) port that provides network
access to the system chassis in order to run remote CLI and Element Manager sessions. The port must
be configured before it can be used.
This command displays the administrative status of the interface port, its assigned IP address and subnet
mask, plus the IP address of the gateway port used to connect to the Ethernet Management port. If the
Ethernet host is directly connected to the Ethernet Management port, without having to go through
Ethernet switches, the default gateway-addr value is 0.0.0.0.
On the Cisco SFS 3012, you may access the Ethernet Management port on the currently active controller
card only. The CLI always defaults to port 2 on the active controller card.
Command Output:
Table 6-74 describes the fields that appear in the show interface mgmt-ethernet command output.
Table 6-74 show interface mgmt-ethernet Command Output Fields
Field Description
port Ethernet management port number, in slot#/port# format.
mac-address MAC address of the Ethernet management port.
auto-negotiate Displays enabled if the port automatically negotiates link speed.
admin-status Displays up if you enabled the port and down if you disabled the port.
ip-addr IP address of the port.
mask Subnet mask of the port.