Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000, Справочник по командам

Страница: 309 / 404

6-143
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib-agent switch
pkey-enf-out Boolean value that indicates whether or not to support optional partition
enforcement for the packets transmitted by this port.
filter-raw-pkt-in Boolean value that indicates whether or not to support optional raw packet
enforcement for the raw packets that were received by this port.
filter-raw-pkt-out Boolean value that indicates whether or not to support optional raw packet
enforcement for the raw packets transmitted by this port.
mkey-violations Number of subnet management packets (SMPs) that have been received on
this port with invalid M_Keys since initial power-up or last reset. For more
information see section 14.2.4, “Management Key” in InfiniBand
Architecture®, Vol. 1, Release 1.1.
pkey-violations Number of subnet management packets that have been received on this port
with invalid P_Keys since initial power-up or the last reset. For more
information, see section 9.2.7, “Partition Key” in InfiniBand
Architecture®, Vol. 1, Release 1.1.
qkey-violations Number of subnet management packets that have been received on this port
with invalid Q_Keys since initial power up or the last reset. For more
information, see InfiniBand Architecture®, Vol. 1, Release 1.1, section
10.2.4, “Q Keys.”
guid-cap Number of GUID entries allowed for this port in the port table. For more
information, see InfiniBand Architecture®, Vol. 1, Release 1.1, section
14.2.5.5, “GUIDCap.”
subnet-timeout Maximum propagation delay allowed for this port to reach any other port
in the subnet. This value also affects the maximum rate at which traps can
be sent from this port.
resp-time-value Maximum time allowed between the port reception of a subnet
management packet and the transmission of the associated response. For
more information, see InfiniBand Architecture®, Vol. 1, Release 1.1,
section 13.4.6.2, “Timers and Timeouts.”
local-phys-err Threshold at which ICRC, VCRC, FCCRC, and all physical errors result in
an entry into the BAD PACKET or BAD PACKET DISCARD states of the
local packet receiver. For more information, see InfiniBand Architecture®,
Vol. 1, Release 1.1, section 7.12.2, “Error Recovery Procedures.”
overrun-err Threshold at which the count of buffer overruns across consecutive
flow-control update periods results in an overrun error.
sl-vl-map Service lane to virtual lane map. Fields in this mapping as described in
Table 6-53 .
Table 6-52 port-info Keyword Output Field Descriptions (continued)
Field Description