Cisco Nexus 92160YC-X, Руководство по установке оборудования

Страница: 34 / 72

Mounting rails on rack or cabinet posts. 3 Fasten the chassis to the front of the rack with two
12-24 or 10-32 screws on each side. 1
Front-mount bracket. 2
d) Tighten the 10-32 screws to 20 in-lb (2.26 N·m) or tighten the 12-24 screws to 30 in-lb (3.39 N·m).
Step 6 If you attached a grounding wire to the chassis grounding pad, connect the other end of the wire to the facility ground.
Grounding the Chassis
The switch chassis is automatically grounded when you properly install the switch in a grounded rack with
metal-to-metal connections between the switch and rack.
You can also ground the chassis, which is required if the rack is not grounded, by attaching a customer-supplied
grounding cable. Attach the cable to the chassis grounding pad and the facility ground.
Statement 1024— Ground Conductor
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available.
Warning
Cisco Nexus 9236C NX-OS Mode Switch Hardware Installation Guide
24
Installing the Switch Chassis
Grounding the Chassis